OPERATION
3-1-50
Adjusting the display
To adjust the display, press
[Display Adjust]
. The
Display Adjust
menu is displayed on
the screen, see Fig. 3-1-45. The backlight, which is on when the instrument is switched ON, can
be toggled ON or OFF using the
[Display ON/OFF]
key, and when ON can be varied in
brightness by
[Dim]
,
[Medium 1]
,
[Medium 2]
and
[Bright]
. Contrast is adjusted with the
control knob. Once adjusted, the LCD setting can be stored in the non-volatile memory by
pressing
[Save LCD Setting]
. The instrument always activates the backlighting whenever it is
switched on.
Fig. 3-1-45 Display adjust menu
Hardware information
To obtain a description of the instrument hardware, press
[Hardware
Status]
and the
following information is displayed:
Instrument
type
Serial no. (e.g.
1543256/045
)
Options fitted (e.g.
SECOND LF OSC.
)
Attenuator type and serial number.
For attenuator calibration information, refer to the Service Manual.
Software information
To obtain a description of the instrument software, press
[Software
Status]
and the
following information is displayed:
Software Version Number e.g.
8.09
Part number e.g.
44533-366
GPIB address e.g.
07
LOCAL
Save LCD
Setting
Display
ON/OFF
Dim
Medium 1
Medium 2
Bright
Use Knob to Adjust Contrast
C0024
