Thanks
for choosing
We hope that this is the start of a long and happy relationship that will enable you to use your bike
more often, for more adventures in an easier and more enjoyable way.
If you’re like us and tend to skip the instructions and just start putting it together. . . . . . we understand.
However if you would like some help getting set up, below are some important and handy tips and
tricks for installing your aeroe gear.
All you need to install any of our products is a standard 5mm allen key. Take a moment to familiarise
yourself with some of the jargon below shown on the
spider rear rack
. The following steps will then
allow you to get setup quickly and easily so you can get out and start enjoying your new gear!
Tool required for install - ‘
5mm allen key
’
spider rear rack ‘
feet
’ and ‘
straps
’
to
connect to seat stays
spider rear rack ‘
cradle
’ which can
be located on top or sides of rack
(or both). Cradle come with in built
‘
cradle straps
’ for easy use.
‘
spider rear rack
’
We love seeing and hearing about your adven-
tures around the world. . . . . . if you want to reach
out or still need installation help - we would love
to hear from you! You can reach us at
or on facebook and instagram
#aeroebikepack
or check out
aeroe.com
for
more information.
Thanks again from the aeroe team!
