11
Setting the system
time
SETTING A SYSTEM TIME
The remote control is fitted with an internal clock
that can display the current time; by pressing on the
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key, the clock icon will start to flash (this flashing
will last 5 seconds, after this if no key is pressed you
automatically exit the time modification mode). While
the clock icon is flashing, you can change the system
time using the and buttons to decrease or
increase the displayed time. After setting the required
value, wait 5 seconds or press the
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key again to
confirm the value (once confirmed, the clock icon will
stop flashing).
ACTIVATING / DEACTIVATING THE IFEEL FUNCTION
If you hold the remote control close to yourself, you can
accurately control the surrounding temperature.
Press
I FEEL
to activate this function.
The
symbol on the display indicates that the iFEEL
function is active. The remote control, by means of an
internal probe, detects the room temperature and
sends it to the indoor unit.
The remote control must always be within its
transmission range and facing towards the indoor unit
of the air conditioner. Do not put it in a drawer or cover
it.
The remote control will update the reading and send
the information to the air conditioner every 10 minutes
and each time the buttons are pressed to change the
settings.
NB:
this function uses the set-point defined by the
user, and ensures greater comfort if the remote
control is kept close to the user (within a maximum
of 8 metres).
When this function is active, you are advised to
keep the remote control away from heat sources
that could distort the real room temperature
reading.
Activating / deactivating the
iFEEL function
ON/OFF
Light
I Feel
Fan
Heat
Cool
Sleep
Wifi
X-Fan
Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
ON/OFF
Light
I Feel
Fan
Heat
Cool
Sleep
Wifi
X-Fan
Temp
T-ON
Clock
Mode
T-OFF
WIFI
ON
