USER MANUAL
COOLMAX SRX-R – Rack Mount
Australian Energy Research Labs
AER09-R – Rev 1.0.0
9
th
May 2023
5
AER09-R REV 1.0.0
Note: Warranty conditions remain current until the next revision of this document is published. Proof of purchase is required when
making a warranty claim.
1
Warranty Duration from the Date of Purchase
Warranty Requirements
Total Warranty Duration
1.
You are the original purchaser of the CoolMax SRX-R.
5 Years
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
AERL will bear the cost of parts and labour to repair any manufacturing faults found within the terms and period of this
warranty and pay the cost of freight to return the repaired CoolMax SRX-R controller within Australia/New Zealand but the
method of freight will be determined by AERL.
An allowance is made for the labour required to disconnect or reinstall faulty parts up to the value of $220 AUD excluding
GST.
All installation and user conditions as set down in the instruction manual must be strictly adhered to as failure to do so
may void your warranty. Any faults or like faults caused by lightning, water or moisture ingress, vermin infestation,
improper voltage, faulty installation, use of the product in a manner for which it is not intended, alterations which affect the
reliability or performance of the unit but are not attributable to faulty manufacture, or damage caused by other system
components will not be covered under warranty.
In the event of the product being out of service, AERL shall bear no responsibility for any consequential loss or expense.
AERL will not be held responsible for any misleading or incorrect information conveyed by anyone not directly employed
by AERL.
For claims under warranty, the faulty product(s) must be returned to AERL’s facility at 2/75 Bluestone Circuit, Seventeen
Mile Rocks, 4073, QLD, Australia after contacting AERL and receiving the appropriate RMA documentation from AERL.
Warranty Conditions
