TRANSPORT AND INSTALLATION
By using an air dehumidifier humidity values of 30% r. h. can be
reached. If lower values are required an adsorption dryer must be
used. Ask your technical advisor.
In case of doubts about the operating conditions your technical advisor can help you.
Electrical connection
DANGER
Danger to life due to electric shock!
Prior to commissioning the technical data of the air
dehumidifier must be compared with the conditions
prevailing in the room of installation!
The following items must be checked prior to electrical connection of the air
dehumidifier:
The mains voltage must be in conformity with the voltage of the air dehumidifier!
Socket outlet and supply system must be sufficiently fused!
If indoor swimming pools or damp locations are concerned, has an
RCCB been installed?
In damp locations or on building sites a residual current circuit breaker
must be installed!
The appliance coupler must be suitable for the building socket outlet!
The socket outlet used must be grounded properly!
Connect the power cable to the power outlet.
Condensate drain 750
Standard equipment of the air dehumidifier AD 750 comprises a collecting tank
(12 l) and a 15 mm connection for the drain hose.
The water bucket is located on a rocker in the appliance. The rocker is actuated
by the weight of the full bucket, and the device is switched off. Switch the
appliance off using the On / Off switch, and empty the water bucket. After the
water bucket has been put back into the appliance switch the appliance on again.
