Once the Nose Cone has been removed, insert the red and black Power Plug of the FPV
Wiring Harness into the open port of the Inspire 1.
Run the Power Leads under the Cables to the right to keep them tight, safe and away from the Compass.
Reattach the Nose Cone using all (qty 4) 2.5mm Bolts as well
as the (qty 2) Phillips Screws. Run the FPV Camera Lead down through the front of the Inspire 1.
Be sure to run the FPV Wiring Harness clear of any moving parts such as the Landing Gear, Arms, Motors, and Propellers.
Use tape or cable ties as needed to secure the cable clear of any moving parts.
