TF7039GB_A_NOT
Page 6 of 48
1.
GENERAL INFORMATION
The AWN Eco+ range has been manufactured in accordance with technical standards and recognised safety
regulations. It was developed to recover heat from exhaust air systems and to heat heating water to support
building heating and domestic hot water preparation and is to be used for these purposes. Any use not ex-
pressly stated in this manual shall not be permitted.
Any contractual and extra-contractual liability of Aereco for damage to persons, animals or property as a
result of installation, adjustment and maintenance errors or improper use shall be excluded.
SCOPE OF APPLICATION
These assembly instructions apply only to the article described and under no circumstances to the complete
system. Relationships to other system components are displayed, if necessary, in diagrams and in the text.
However, this is only done to clarify the overall context. Further assembly instructions as well as assembly
instructions from manufacturers of other devices must be strictly observed.
INSTRUCTIONS FOR USE
Before starting any work, read this manual carefully and undertake any necessary safety checks to prevent
any risk.
We reserve the right to make changes to the design and technical data. Said changes are also effective
without prior notice. Therefore, no claims can be derived from the text information, illustrations or drawings.
Errors reserved.
In addition to the provisions of these assembly instructions, other applicable rules must also be observed.
This applies in particular to rules for accident prevention, recognised technical rules and safety rules (DIN,
VDI, VDE, etc.). All works are to be carried out by specialist personnel in accordance with the provisions in
force applicable to each country.
The instructions, together with all other documents, are to be given to the unit operator, who assumes re-
sponsibility for retaining these documents and shall ensure that they are available if required.
We reserve all rights to the publications. The pictures in this catalogue may only be used with the express
written permission of Aereco GmbH. Slight colour deviations may occur due to printing reasons. Subject to
technical changes without notice.
