14
• Remove the three
transport feet from
the main body (1) by
unscrewing the bolts,
washers and locknuts.
• Let out the safety wire
(16) laterally, hooking the
snap-hooks (19) to the
eyebolts on the motor,
verifying the correct
tightening.
• Mount the plastic hub
cover (11) under the hub
using the M4 bolts (12).
In case water is used
for washing, drill a hole
in the plastic cover for
water drainage.
• Insert the blade (13) over
the blade root, lock it with
the M8 flange bolts (8),
spring washers (10) and
locknuts (9).Tighten the
screws making reference
to table 1.
Mount the plastic caps
(14) on the locknuts.
• Fix the assembly to the
ceiling/beam through the
8 holes on the brackets
(3); fix the security wire
to the ceiling/beam using
the clamps (18). Fixing
screws/plugs are not
supplied.
13
10
9
14
8
Fig. VIII
18
Fig. VII
Staffe di appoggio per
il trasporto in imballo
Fig. IV
Fig. V
Fig. VI
295
325
100
150
154
10,5
Fig. VI
Dimensioni in mm delle piastre
di fissaggio a soffitto (3)
Fig. VIII
12
11
Fig. IX
19
Fig. V
dimensions in mm of the
brackets (3)
transport foot
Fig. IV
18
Fig. VII
12
11
Fig. IX
12
11
Fig. IX
Fig. V
Fig. VI
Fig. VII
Fig. VIII
Fig. IX
