16
5.6 Floor installation
The unit must be installed in the following position.
Fig. 5.g
Spirit Level
Fig. 5.h
5.g
Prepare the surface where the unit is to be mounted. Make sure that the surface is flat, leveled and that it supports the weight
of the unit. Perform the installation in accordance with local rules and regulations.
5.h
Use appropriate screws (not supplied) to fix the unit to the ceiling. It is recommended to fit the unit with anti-vibration mounts
(not supplied).
The unit must be earthed.
The AIRQURE P1-N is wired internally from factory.
Unit comes pre-wired with:
- mains supply cable (3-core: brown, blue, yellow/green).
- wiring cable to remote switch (2-core: blue, brown).
5.7 Precabled electric connections
ATTENZIONE
Make sure that the mains supply to the unit is disconnected before
performing any installation, service, maintenance or electrical work!
The installation and service of the unit and complete ventilation system must be performed
by an authorized installer and in accordance with local rules and regulations.
Fig. 5.i
Electric connection AIRQURE P1-N.
POWER SUPPLY
CONTROL
YELL
O
W
-GREEN
BL
UE
BROW
N
N L
BL
UE
BROW
N
AIRQURE P1-N
17
The unit must be earthed.
The AIRQURE P1-H is wired internally from factory.
Unit comes pre-wired with:
- mains supply cable (3-core: brown, blue, yellow/green).
- wiring cable to remote switch (4-core: green, white, yellow, brown).
Fig. 5.l
CTRL-P1 (on request)
I
I I
I
POWER SUPPLY
CONTROL
YELL
O
W
-GREEN
BL
UE
BROW
N
N L
YELL
O
W (S2)
WHITE (S3)
BR
O
WN (S1)
GREEN (GND)
POWER SUPPLY
CONTROL
YELL
O
W
-GREEN
BL
UE
BROW
N
N L
YELL
O
W (S2)
WHITE (S3)
BR
O
WN (S1)
GREEN (GND)
CTRL-P1
L
1
1
1
L
L
S1 S2 S3
II
I
I
Fig. 5.j
Wiring diagram with a remote dedicated switch (not supplied).
Attention:
the heating element cannot be deactivated, it remains in
AUTO mode.
Fig. 5.k
Wiring diagram with CTRL-P1 (recommended solution).
Attention:
the AUTO mode of the heating element can be
deactivated.
AUTO
AUTO
AIRQURE P1-H
