Aemulus AM450e, Руководство пользователя

Страница: 4 / 25

AM450e User Manual
AEMULUS 3
B. Identification and Discouragement of Hazardous Applications
Main Power

Ensure that the mains power is turned off before plugging
or removing the PXI module into or from the chassis.

Make sure the power cord is plugged properly to the
chassis before applying power.

The chassis that carries the instrument has to be plugged
into a grounded (earthed) power outlet. By not doing so, it
will defeat the power cord safety ground feature.

Ensure that the power is removed from the product before
connecting/disconnecting the cables to the product
connectors.
Instrument Cables /
Connectors

Inspection of the connecting cable and test leads for
possible wear, cracks, or breaks must be done before each
use.

Make sure the cables used for the product are rated to the
specified voltage and current level.
Instrument Output

Extreme caution is to be practiced when a shock hazard is
present. Lethal voltage may be present on cable connector
jacks.

When power is applied to the circuit under test, do not
touch the product and test cables or test leads.

Do not touch the connector jacks or cables when the
output of the product is turned on.
WARNING
CAUTION
WARNING