AM450e User Manual
AEMULUS
21
Section 4: Maintenance
4.1 Cleaning
Before doing any cleaning to the product, switch off the chassis and disconnect it from main
power supply.
You can wipe the front panel of the module using a soft cloth moistened in water, taking care
not to wet the connectors. Do not use aerosol or liquid solvent cleaners.
You can use a handheld vacuum cleaner to remove any accumulated dust on the product, if
necessary.
Be careful NOT to be in direct contact with any circuits on the product to
prevent any damages. Contaminants such as oils and salts from the
human skin can affect the performance of the product.
Comply with good ESD practice when handling the product during
cleaning.
4.2 Calibration
Electronic components tend to drift over time. Environmental changes, operation stresses and
aging increase the measurement uncertainty. Periodic calibration is required to ensure the
accuracy of the instrument.
The recommended calibration interval for the product is 6 months.
4.3 Servicing
There are no user-serviceable parts in the product; if any attention is needed, return it to
instrument manufacturer.
Any repair that is not covered in this manual should only be performed
by qualified Aemulus personnel.
CAUTION
NOTE
