AEMC PowerPad 3945-B Скачать руководство пользователя страница 71

Страница: 71 / 108

Power Quality Analyzer Model 3945-B

NOTE:

The installation of the drivers may take a few moments. Windows may

even indicate that it is not responding, however it is running. Please wait for
it to finish.

14.

When the drivers are finished installing, the

Installation Successful

dialog

box will appear. Click on

15.

Next, the

Installation Wizard Complete

window will appear. Click on

Finish

16.

Question

dialog box appears next. Click

Yes

to read the procedure for con-

necting the instrument to the USB port on the computer.

NOTE:

The Set-up window remains open. You may now select another option

to download (e.g. Adobe

Reader), or close the window.

17.

Restart

your computer, then connect the instrument to the USB port on the

computer.

18.

Once connected, the

Found New Hardware

dialog box will appear. Windows

will complete the driver installation process automatically.

Shortcuts for DataView

and each instrument control panel selected during the

installation process have been added to your desktop.

NOTE:

If you connected your instrument to the computer before installing

the software and drivers, you may need to use the

Add/Remove Hardware

utility to remove the instrument driver before repeating the process.

6.2 Connecting the Model 3945-B to your Computer

The Model 3945-B is supplied with an optically isolated serial interface cable

required for connecting the instrument to the computer. This cable (Cat. #2140.18)

is equipped with a 9-pin connector on one end, and an optical connector on the

other end.
To connect the Model 3945-B to your computer:

1. Connect the optical connector end of the cable to the serial port on the

side panel of the Model 3945-B PowerPad

2. Connect the 9-pin connector end of the cable, to an available serial port

on your computer. If your computer does not have a serial port, you can

obtain a serial port to USB converter from many computer stores.

You are now ready to use the DataView

software with the PowerPad

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 71 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: