AEMC PowerPad 3945-B Скачать руководство пользователя страница 41

Страница: 41 / 108

Power Quality Analyzer Model 3945-B

4.1.10 Clear Memory

When CLEAR MEMORY is selected, the following question is displayed:

Are you sure you want to delete all the data?

Yes

• Choose the answer with the

buttons.

• Press the

button to apply your choice. The Configuration menu will once

again be displayed on the screen.

When data is deleted, all detected alarms, screen snapshots, captured tran-
sient states and all recordings are deleted.

The configuration will return to the default setting and the instrument will
automatically turn OFF once the data has been deleted.

4.1.11 Line Frequency

Rated frequency of network: 50 or 60Hz

This parameter determines the correction coefficients used for calculating
power and energy.

• Highlight Line Frequency with the

buttons, then press the button.

• Choose the line frequency using the

buttons.

• Press the button to apply your selection. The Configuration menu will once

again be displayed on the screen.

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 41 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: