AEMC PowerPad 3945-B Скачать руководство пользователя страница 10

Страница: 10 / 108

Power Quality Analyzer Model 3945-B

1.2 Definition of Measurement Categories

CAT II:

For measurements performed on circuits directly connected to the

electrical distribution system. Examples are measurements on household

appliances or portable tools.

CAT III:

For measurements performed in the building installation at the distribution

level such as on hardwired equipment in fixed installation and circuit

breakers.

CAT IV:

For measurements performed at the primary electrical supply (<1000V)

such as on primary overcurrent protection devices, ripple control units,

or meters.

1.3 Receiving Your Shipment

Make sure that the contents shipped are consistent with the packing list. Notify

your distributor of any missing items. If the equipment appears to be damaged,

file a claim immediately with the carrier and notify your distributor at once, giving

a detailed description of any damage. Save the damaged packing container to

substantiate your claim. Do not use equipment which is damaged or appears to

be damaged.

After receiving your PowerPad

, charge and discharge the instrument one or

two cycles to ensure the proper level display of the battery indicator.

1.4 Ordering Information

PowerPad

Model 3945-B

..............................................................

Cat. #2130.74

Includes extra large tool bag, soft carrying pouch, four 10 ft color-coded voltage leads and alligator

clips, RS-232 DB9F optically coupled serial cable, RS-232 to USB adapter, US 115V power cord,

rechargeable NiMH battery pack, and a USB stick with DataView

software and user manual.

PowerPad

Model 3945-B w/MN93

................................................

Cat. #2130.75

Includes meter, set of three MN93 (240A) probes, extra large tool bag, soft carrying pouch, four

10 ft color-coded voltage leads and alligator clips, RS-232 DB9F optically coupled serial cable,

RS-232 to USB adapter, US 115V power cord, rechargeable NiMH battery pack, and a USB stick
with DataView

software and user manual.

PowerPad

Model 3945-B w/SR193

...............................................

Cat. #2130.76

Includes meter, set of three SR193 (1200A) probes, extra large tool bag, soft carrying pouch, four

10 ft color-coded voltage leads and alligator clips, RS-232 DB9F optically coupled serial cable,

RS-232 to USB adapter, US 115V power cord, rechargeable NiMH battery pack, and a USB stick

with DataView

software and user manual.

PowerPad

Model 3945-B w/24" AmpFlex

193-24

......................

Cat. #2130.77

Includes meter, set of three 24" AmpFlex

193-24 (6500A) sensors, extra large tool bag, soft carry-

ing pouch, four 10 ft color-coded voltage leads and alligator clips, RS-232 DB9F optically coupled

Содержание PowerPad 3945-B













































































































Результаты поиска

Содержание PowerPad 3945-B

Отзывы:

AEMC PowerPad 3945-B, Руководство пользователя, Страница: 10 / 108

Результаты поиска

Содержание PowerPad 3945-B

Отзывы: