DC/AC MicroProbe Models K100 and K110
7
1.1 PRECAUTIONS FOR USE
These safety warnings are provided to ensure the safety of personnel and
proper operation of the instrument.
• Read the instruction manual completely and follow all the safety
information before attempting to use or service this instrument.
• Use caution on any circuit: Potentially high voltages and currents may
be present and may pose a shock hazard.
•
Read the Safety Specifications section prior to using the Model K100/
K110. Never exceed the maximum voltage ratings given.
• Safety is the responsibility of the operator.
• NEVER open the back of the instrument while connected to any circuit
or input.
• ALWAYS connect the Model K100/K110 adapter to the display device
before clamping the probe onto the sample under test.
• ALWAYS inspect the instrument, probe, probe cable and output
terminals prior to use. Replace any defective parts immediately.
• NEVER use the Model K100/K110 on electrical conductors rated above
300V CAT II, EN61010-1.
1.2 RECEIVING YOUR SHIPMENT
Upon receiving your shipment, make sure that the contents are consistent
with the packing list. Notify your distributor of any missing items. If the
equipment appears to be damaged, file a claim immediately with the car
-
rier and notify your distributor at once, giving a detailed description of any
damage.
1.3 ORDERING INFORMATION
DC/AC MicroProbe Model K100 ................................................
Cat. #1200.67
DC/AC MicroProbe Model K110 .................................................
Cat. #2111.73
Both models include an electronic plug-in module with an attached current
probe, 9V battery, and user manual.
Order Accessories and Replacement Parts Directly Online
for availability
