AEMC 8505 Скачать руководство пользователя страница 14

Страница: 14 / 16

Quick Tester Model 8505

4. MAINTENANCE

4.1 Cleaning

Disconnect anything connected to the device.

●

Use a soft cloth lightly moistened with soapy water. Wipe with a moist

cloth and then completely dry with a dry cloth.

●

Never use alcohol, solvents or hydrocarbons.

4.2 Repair

Ship To:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

15 Faraday Drive

Dover, NH 03820 USA

Phone: (800) 945-2362 or (603) 749-6434 (Ext. 360)

Fax:

(603) 742-2346 or (603) 749-6309

E-mail: [email protected]

NOTE: You must obtain a CSA# before returning any instrument.

Costs for repair, standard calibration, and calibration traceable to N.I.S.T.

are available.

4.3 Technical and Sales Assistance

If you are experiencing any technical problems, or require any assistance

with the proper operation or application of your instrument, please call,

mail, fax or e-mail our technical support team:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

200 Foxborough Boulevard

Foxborough, MA 02035 USA

Phone: (800) 343-1391 or (508) 698-2115

Fax: (508) 698-2118

E-mail: [email protected]

NOTE: Do not ship Instruments to our Foxborough, MA address.

Содержание 8505

















Результаты поиска

Содержание 8505

Отзывы:

Похожие инструкции для 8505

Бренды по названию

Популярные бренды

AEMC 8505, Быстрый старт

Результаты поиска

Содержание 8505

Отзывы:

Похожие инструкции для 8505

Бренды по названию

Популярные бренды