32
The measured value is displayed on the screen.
3.13.3 Frequency Measurement (W)
1. Set the switch to
and press the
button four times. The
Hz
symbol is displayed;
2. Select AC or AC+DC by pressing the
(yellow) button until the
desired choice is reached.
3. Connect the black lead to the
COM
terminal and the red lead to the "
+
"
terminal.
4. Place the test probes or the alligator clips of the black lead on the
neutral (N) and that of the red lead on the L phase.
5. Clamp the jaws around the conductor to be measured.
The measurement is displayed on screen.
Содержание 205
Страница 1: ...205 POWER CLAMP ON METER User Manual ENGLISH ...
Страница 2: ...2 ...
Страница 34: ...34 The measurement is displayed on screen ...
