AEMC instruments 2153.61, Руководство пользователя

Страница: 14 / 36

14 Data Logger Model DL913 & DL914
3.2 CONFIGURATION
The Data Logger Control Panel is the primary interface for setting up and
operating the Models DL913 and DL914.
Setup tasks include the following:
■
Connecting the instrument to the computer
■
Setting the instrument date and time
■
Selecting parameters, like the aggregation period and communication options
■ Scheduling, starting, and stopping recordings
■
Transferring recorded data from the instrument to the computer
■
Erasing the instrument’s memory
All configuration tasks are described in the help system that comes with the
Data Logger Control Panel software. See § 5 for instructions on installing the
Data Logger Control Panel.
In addition, a limited number of settings can be configured via the instrument’s
front panel interface. These include the following:
■
Enabling Wi-Fi (via direct connection or router)
■
Selecting the nominal current and the number of sensor wraps (turns)
■
Selecting the aggregation period
■ Selecting the recording mode
■
Erasing instrument memory
To enter Configuration mode, press either ◄ or ► until the Configuration
icon is highlighted. There are two situations that prevent you from making
changes in Configuration mode:
■ The instrument is being configured by the Data Logger Control Panel
■
A recording session is in progress or scheduled
If either situation applies, you will not be able to enter Configuration mode and
LOCKED will appear on the LCD display when you select the icon.
3.2.1 Time/Date Setting
Before recording data, the instrument’s time and date must be accurate. The
time and date can be set via the DataView
®
Data Logger Control Panel (consult
the Control Panel Help for instructions). To check the instrument date and time,
use the following instructions:
1. In Information mode , use the Up ▲ or Down ▼ button to display the
Date and Time screens.
2. If the correct date or time is not displayed, connect the instrument to a
computer running the Data Logger Control Panel (see § 5.3).
3. In the Data Logger Control Panel, click Instrument in the menu bar at the
top of the screen.
4. In the drop-down menu, click Set Clock to display the Date/Time screen.
5. Set the date and time.
If you need assistance, press F1 to open the Data Logger Control Panel Help.