3
AEM UNIVERSAL 4” INLET INTAKE GUIDELINES
• The battery negative cable must be disconnected before starting construction of the
intake system.
•
When designing the intake system, the filter needs to be in a location that has at
least 4” clearance around the whole filter for the best performance and filtration.The
filter should be mounted in a location that protects the filter from direct contact with
debris and water.
•
There must be at least 1” straight at the end of any tube where a coupler or filter is
attached.
•
When choosing a Mass air flow sensor (MAF) location for the BLADE style sensor, It
is very important to place the sensor in the middle of a straight section. If the MAF
sensor is directly after a bend in the inlet tract, high fuel trims may cause a check
engine light to illumintate.
•
The tubular MAF sensor must be placed directly after the air filter.
Blade style MAF
Tubular style MAF
