INTRODUCTION
FEATURES
DK-2836 is a self-contained two output relay, vandal resistant and weatherproof keypad. It combines
digital keypad and proximity EM card reader in one unit.
The keypad has been designed for full feature stand alone access control applications. It is
expandable to work with an optional decoder (DA-2800 or DA-2801) for high security split-decoded
operation. It is also compatible with the auxiliary card reader (AR-2802) and the auxiliary keypad
readers (AR-2806, AR-2807 and AR-2809) for upgrading a stand alone or split-decoded system to
multi-station operation.
The keypad is ideally for door strike and alarm arm-disarm controls. It is also a programmable
industrial timer (from 1 second to over 24 hours) for automatic operator system.
Two versions are available for DK-2836. They are denoted with a suffix letter “A” & “B”
DK-2836A (Standard Version):
Output Relay 1
– 2A Rating N.C. & N.O. Contacts for Door Lock Actuation Control
Output Relay 2
– 2A Rating N.C. & N.O. Contacts for Auxiliary Device Control
DK-2836B (Door Bell Button Version):
Output Relay 1
– 2A Rating N.C. & N.O. Contacts for Door Lock Actuation Control
Output Relay 2
– 2A Rating N.C. & N.O. Contacts for External Door Bell Actuation Control
A member of the Tri-Tech series keypads compatible with the optional controllers & reader keypads
for system expansion
Loaded with the DK-2800 MK-II operation software
Built-in with all the logics for stand alone, split-decoded and multi-station operations
Controls “Going in” with User Codes / Cards and “Going out” with feature programmable egress
button
Independent control for the two output relays with programming timer (DK-2836A)
Total 1,100 User Codes / Cards for controlling of the two outputs (DK-2836A)
Indoor or outdoor installation with IP-65 all weather ingress protection
Stainless steel faceplate combines with die-casting metal back-lit key buttons
Die-Cast Zinc Alloy Protection Bracket for Surface Mount
Package Contents
• One DK-2836 Keypad
• Two EM Cards
• One Pack of Mounting Screws
• One Centre Pin Torx Screw Wrench
• One User Manual
4
57
(F) OUTPUT 2 -- Door Bell Button (DK-2836B)
N.O.
DOOR
BELL
ELECTRONIC
DOOR CHIME
(OPTIONAL)
The output 2 of the DK-2836B is prepared for
triggering a low power door chime.
DO NOT
use it as a high voltage power path for a door
bell. The maximum power rating of the
contact is 24V DC/1 Amp.
Connect the N.O. output contact in parallel
with the door bell button.
