13
Device Control
The
encoder
and
decoder
allow
you
to
use
PC
configurator
(HDMIoverIPConsole), AGS-i Touch and IP control box for controlling them.
This section briefly introduces how to route the video from source to the
display using these tools. By default, audio, video, IR and RS232 signals are
routed together. For more information, see their guides.
The following tables describes how audio, video, IR, USB and RS232 signals
are routed using different tools.
Control Tools
Description
PC configurator
Route audio, video, IR, USB and RS232 signals
together.
AGS-i Touch
IP Control box
Both of the following routing policies are available.
By default, route audio, video, IR, USB and
RS232 signals together. Route audio, video, IR
and RS232 signals separately via API
commands from IP control box.
Note: For more information about above tools, see their guides.
Firmware Upgrade
You can use MaintainTool to upgrade the encoders and decoders to their latest
versions to obtain new features. For more information, see the user guide of
MaintainTool.
+886-2-8228-0573
