9
Decoder
Front Panel
4
2
3
2
1
No.
Name
Description
1
Power
LED
On: The device is powered on.
Off: The device is powered off.
2
Status
LED
On: The device is receiving IP stream.
Blinking: The device
doesn’t receive IP stream.
Off: The device is powered off or in the boot process.
3
USB 1-2
Connect to USB devices (e.g. keyboard, mouse)
4
ID Key
Short press the ID key to show the information of
encoder and decoder (e.g. device’s IP mode, IP address
and MAC address) on the display.
Press and hold the key for more than 2 seconds to switch
to the next encoder with a greater MAC address in turn.
Rear Panel
2
1
No.
Name
Description
1
DC 12V
Connect to the power adapter provided.
2
Audio Out
Connect to an audio decoder such as an amplifier for audio
de-embedding output from HDMI source.
3
HDMI Out
Connect to an HDMI display device.
4
RS232
Connect this port to a RS232 device to bidirectionally
communicate with a RS232 device at the IP control box or
encoder side.
5
IR In
Connect to the broadband IR receiver cable.
6
IR Out
Connect to the IR emitter cable.
7
LAN (POE)
Connect to a network switch for IP streaming input and
