No.
Name
Description
Ethernet port indicators
:same as above
Note:
Only LAN1 (AV/POE) port supports PoE. You can
connect it to a PoE switch to receive power,
eliminating the need for a nearby power outlet.
We would recommend that you power IP controller
using either a power adapter or a PoE switch instead
of using both them at the same time. For example, if
you want to use a power adapter, ensure that PoE
function of the connected LAN port in the switch is
disabled or a non-PoE switch is used.
2
RS232 ports
Left (DEBUG):
Pins TX, RX, G are used for device
troubleshooting only.
RS232 parameters:
Baud Rate
115 200 bps
Data Bits
8 bits
Parity
None
Stop Bits
1
Middle (Control):
Pins G, RX, TX are used for controlling,
configuring and managing IP controller, encoders and
decoders through RS232 software or a third party
controller.
RS232 parameters:
Baud Rate
9 600 bps
Data Bits
8 bits
Parity
None
Stop Bits
1
Right (Power):
Pins G, 12V are used for providing a 12
VDC 0.5 A output.
Note:
Please connect the correct pins for device debug
and control. When IP controller is powered by a power
adapter, if you connect control terminal to control port after
first connection with the debug port, you need to reboot IP
controller for device control process.
3
DC 12V
Connects to a supplied 12 VDC 1 A power adapter.
