23PME Manual Sheet
Note: Factory Pass Code is 12345678
OPENING THE SAFE FOR THE FIRST TIME
1.
Remove the Back-up key cover away.
2.
Insert the Back-up key into the keyhole and turn anticlockwise, hole
the position, at the same time, turn the handle
Warning: Do not store your back up keys inside the safe.
PROGRAMMING YOUR PASSCODE
With the door unlocked, press the reset button (the red button on hinge
side) and the buzzer beeps twice and yellow light flashes twice. Then
yellow light on.
Input 1 to 8 digits and end with “#” button to confirm the setting.
The buzzer beeps twice and green light flashes twice, it means new code
was successful.
If the buzzer beeps five (5) times and yellow light flashes five (5) times
and yellow light goes on, the code failed. Press reset button again and
