9
Interior Accessories
Storage shelves
• You should always slide one of the full size glass storage shelf into the
lowest set of guides, above the fruit and the vegetable containers, and
keep it in this position.
• The height of the storage shelves
can be adjusted:
• To do this pull the storage shelf
forward until it can be swivelle-
dupwards or downwards and
removed.
• Please do the same in reverse to
insert the shelf at a different hei-
ght.
Adjusting the upper door rack
• Depending on the food stored, the upper door racks can be changed to
other holders or removed. Take out the refrigerators food, press the door
racks digonally upwards at their edges, reposition them, and press them
back into place.
D338
1.
To turn on the holiday function, press button (C).
2.
Press button (C) continuously until the letter “H” (Holiday) appears on the
temperature indicator. The temperature indicator can modify the displayed
temperature up to +8°C, 1° at a tim. 8°C will be followed by the letter “H”.
Now the refrigerator is in the “holiday” function in the energy-saving mode.
The fridge compartment must be empty with holiday function on.
Turning OFF the refrigeration compartment
T
o turn off the refrigerator press the button “C” several times until the sym-
bol “OF” appears in the temperature indicator (F). Press the button “C” again
for about 5 seconds. In the temperature indicator there is a “count down”
i.e. a backward counting from “3” to “1”. When “1” appears the refrigerator
is turned off. The temperature indicator switches off.
PR271
Humidity control
The glass shelf incorporates a device
with slits (adjustable by means of a sli-
ding lever), which makes it possible to
regulate the temperature in the vege-
table drawer(s). Close the slots to
obtain a warmer temperature and
greater humidity. Open the slots to
obtain a cooler temperature and less
humidity.
20
Unusual noises.
The appliance is touching the
wall or other objects.
Appliance is not level.
The compressor starts after a
period of time.
See the "Cleaning and Care"
section.
This is normal, no error has
occurred.
The compressor does not start
immediately after changing
the temperature setting.
Water on the floor or on sto-
rage shelves.
Water drain hole is blocked.
Move the appliance slightly.
Readjust the feet.
Changing the light bulb
Warning!
There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: replace the lamp with
one of the same power (the maximum
power is shown on the light diffuser).
1.
To switch off the appliance, press the
button “B”.
2.
Unplug the mains plug.
3.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
4.
Change the defective light bulb.
5.
Refit the light bulb cover.
6.
Put the refrigerator back into opera-
tion.
Malfunction
Possible Cause
Remedy
If, after carrying out the necessary checks there is still a fault with your
appliance please contact your local AEG Service Force Centre.
In guarantee customers should ensure that the suggested checks have
been made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee service
calls.
