AEG PowerCare LR86CB86, Руководство пользователя

Страница: 15 / 48

The digital indicator can show:
• Programme duration (e. g.
).
The time shown when the programme is set could
not correspond to effective duration and change af‐
ter ProSense phase.
• Maximum load.
• Finish in time (e. g.
or ).
• Cycle end ( ).
• Warning code (e.g.
).
• Indication of total operating hours of the appliance. Refer to the 'Op‐
erating hours counter' section in the 'Settings' paragraph for more
details.
Maximum load indicator. The value is shown for three seconds after
programme selection, alternated with cycle duration.
Maximum laundry indicator. It blinks if the laundry amount exceeds the
declared load.
This indicator reminds to run a cleaning cycle.
Child safety lock indicator.
The Temperature area:
Temperature indicator
Cold water indicator
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Extra Silent indicator.
Rinse hold indicator.
Pre-wash indicator.
Stain indicator.
7. DIAL AND BUTTONS
7.1 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
7.2 Programme dial
By rotating the programme dial it is
possible to select the desired
programme.
ENGLISH 15