818 17 78-00/5
13
Changing over the Door Hinges
The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning!
Unplug from the mains, before reversing the door.
0
1.
Open the door and remove the
plinth to the front. Move the
door bearing cover on the plinth
from the left to the right.
Close the door
2.
With the door closed, remove
the cross-head screws from the
lower door bearing and remove
the door bearing downwards.
3.
Remove the door fitting from the
door bearing (1, 2). Move the
bearing pivot from the right to
the left hand hole (3). Place the
door fitting supplied on the bear-
ing pivot (4, 5).
1
2
5
4
3
