7.2
Introduction
The options/functions are
not selectable with all
washing programs. Check
the compatibility between
options/functions and
washing programs in the
"Program Chart". An
option/
function can exclude
another
one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
7.3
Temperature
When you select a washing program,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and
, the appliance does not
heat the water.
7.4
Spin
When you set a program, the
appliance automatically selects the
maximum spin speed.
Touch this button repeatedly to:
•
Decrease the spin speed.
The display shows only
the spin speeds available
for the set program.
.
•
Activate the Rinse Hold option
.
The water of the last rinse is not
drained out to prevent the fabrics
from creasing. The washing
program ends with water in the
drum and the final spin phase is not
performed.
The display shows the indicator
The
drum turns regularly to reduce
creasing.
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch Start/Pause button: the
appliance performs the spinning
phase and drains the water.
•
Activate the Extra silent option.
All
spinning phases (intermediate spin
and final spin) are suppressed and the
program ends with water in the
drum.
This helps to reduce creasing.
As the
program is very quiet, it is
suitable for
use at night time when
cheaper
electricity tariffs are available.
In some
programs the rinses are
performed
with more water.
The display shows the indicator .
The door stays locked. The drum
turns
regularly to reduce creasing.
You must
drain the water to unlock
the door.
Touch the Start/Pause button: the
appliance performs only the draining
phase.
The appliance empties the
water out automatically after
approximately 18 hours.
7.5
Stains/Prewash
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
•
Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
. The stain remover is
pre-mixed and heated with detergent
in order to improve its effectiveness.
This option can increase
the program duration.
This option is not
available with a
temperature lower than
40 °C.
•
Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
ENGLISH
15
Содержание LF8C8412A
Страница 1: ...USER MANUAL EN User Manual Washing Machine LF8C8412A ...
Страница 42: ......
Страница 43: ......
Страница 44: ...www aeg com au 157032090 A 092020 ...