AEG LF6ES8431A, Руководство пользователя

Страница: 21 / 44

9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Remove the folded tag in the
detergent compartment marked by
. This tag suggests to use the
right amount of detergent or
softener for avoiding overdosing.
4. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any detergent and laundry in the
drum.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2.
Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
appliance automatically proposes a
default program. The relevant indicator
illuminates.
The display shows the maximum load,
the default temperature, the default spin
speed, the indicators of the phases
making up the program and the cycle
duration.
10.2
Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
ENGLISH 21