Drying
21
Cleaning the condenser
1
Important!
When the CONDENSER (WARMTEWISSELAR) display lights,
it is essential to clean the condenser. Otherwise your dryer might suffer
damage. In addition energy consumption will be increased if the con-
denser unit is covered with fluff.
0
Open the door.
0
Press on the two tabs to unlatch and
take off the removable plinth.
0
Turn the two securing disks through a
quarter turn each outwards.
0
Pull the condenser out of the base by the
handle.
0
Clean the condenser, best with a hand-
held brush or by rinsing with a hand-
held shower head. The water removal
slits on the rear of the condenser must
be free too.
1
Important!
Do not use any sharply pointed objects to clean the con-
denser. They could make it leak.
0
Reinsert and push in and turn each one of the two securing disks
through a quarter turn inwards. The words "top – oben – en haut" must
be at the top.
0
Re-mount the plinth.
1
Important!
The dryer must not be operated without condenser.
Switch-off the dryer
0
Turn the program selector to the OFF (UIT) position.
