AEG LAVAMAT BELLA 1480, Руководство пользователя

Страница: 34 / 36

User information
34
- Connect the feed hose connector onto the
water inlet tap.
- Turn on the water inlet tap.
The water inlet hose cannot be extended. If it is too short, please
contact the After Sales Department.
Drain
- Assemble the hose holder onto the drain hose.
- Place the assembly in a drainage pipe (or in a
sink) at a height between 70 and 100 cm. Make
sure that it will not fall out.
You must provide an air intake at the end of the drainage hose, to
avoid any water being siphoned.
Important: the drainage hose must not be extended, on any account.
If it is too short, contact a qualified engineer.
Secure the outlet / sink outlet joint with a hose
band clip (available from your dealer).
Eletrical connection
You can only connect this washing machine to 230 V single phase
power supply.
Check rating of the fuse line : 10 A at 230 V.
The washing machine must not be connected through an extension
cable or a power bar. Check that the earthing connection is conform
with the regulations in force.