13
–
the washing’s degree of soiling,
–
the size of the load
–
the degree of hardness of the water supply.
•
If the manufacturer does not give instructions for small loads: for a
half load, use a third less, for a very small load, use only half of the
detergent that is recommended for a full load.
•
From water hardness 2 (= medium) upwards, water softener should
be used. Detergent can then always be dosed for water hardness 1
(= soft). Your local water company will be able to give you informa-
tion about the water hardness in your area.
1.
Pull the detergent dispenser drawer out as far as the stop.
2.
Add the detergent/additives.
3.
Push the drawer in fully.
Washing powder/tablets for the main wash
If you are using water softener and need the right-hand compartment
for the pre-wash detergent, add the water softener to the main wash
detergent in the left-hand compartment.
Softeners, wash-care products to preserve the shape of garments,
starch
Do not fill the compartment beyond the MAX mark. Dilute thick liquid
concentrates according to the manufacturer’s instructions before
putting them into the drawer. Dissolve powder starches.
If you use liquid detergents:
Add liquid detergent using the dosage container provided by the deter-
gent manufacturer.
In-wash stain treatment/
tablets
Washing powder/tablets
for the main wash
Softeners/
wash-care products
to preserve the shape
of garments/
starch
Washing powder/tablets
for the pre-wash
or for water softener
