If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.
BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
3.
Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10.
DAILY USE
WARNING!
Refer to Safety chapters.
10.1
Loading the laundry
1.
Open the appliance door
2.
Put the laundry in the drum, one item
at a time.
3.
Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4.
Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
10.2
Using detergent and
additives
1.
Measure out the detergent and the
fabric conditioner.
2.
Put the detergent and the fabric
conditioner into the compartments.
3.
Carefully close the detergent drawer
10.3
Detergent compartments
Detergent compartment for
washing phase.
If you use liquid detergent,
put it immediately before you
start the programme.
www.aeg.com
12