AEG LAVAMAT 64850L, Руководство пользователя

Страница: 33 / 36

Please ensure that when the appliance is installed, it is easily accessible for the engineer in
the event of a breakdown.
Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or
similar materials under the machine to compensate for any unevenness in the floor.
Water inlet
The inlet hose is supplied with the appliance and can be found inside the machine drum.
This appliance must be connected to a cold water supply.
Do not use the hose from your previous machine to connect to the water supply.
1. Open the porthole and extract the inlet
hose.
2. Connect the hose with the angled con-
nection to the machine back.
Do not place the inlet hose downwards.
Angle the hose to the left or right depend -
ing on the position of your water tap.
3. Set the hose correctly by loosening the
ring nut. After positioning the inlet
hose, be sure to tighten the ring nut
again to prevent leaks.
4. Connect the appropriate end of the hose
to a tap with a 3/4” thread. Always use
the hose supplied with the appliance.
Water drainage
The end of the drain hose can be positioned in three ways:
1.
Hooked over the edge of a sink using the plastic hose guide supplied with the ma -
chine.
In this case, make sure the end cannot come unhooked when the machine is emptying.
Installation 33