User information
12
• Cancelling of the programme :
If you wish to cancel a programme, turn the knob of the programmes
selector on the OFF position. It’s possible to choose a new programme,
after the cancelling of the previous one.
• Programme duration :
This one is calculated regarding the maximal load provided for each
type of textile. The indication of the washing time appears in minutes
in the display and reduces minute per minute. The programmes
durations can vary regarding the temperature, the water inlet pressure
and the power supply of your electrical installation or regarding foam
detection during rinses or unbalances in spinning. These ones adjust
themselves automatically during cycles. When the programme is over,
"0" appears in the display.
• Delay Start :
You can activate the delay start thanks to the DELAY START pushbutton
(23 hours maximum). The elapsed time decreases by the hour.
• Error codes :
Eventual operating problems regarding the functionning are indicated
by an error code on the display. The error code helps users and the
After Sales Service (refer to concerned pages ).
Starting the program
After you chose the washing program, press the
Start/Pause pushbutton to start the cycle. The
corresponding light stays on.
It is normal that the program selector does not
turn during the cycle.
Содержание LAVAMAT 47080 aqua control
Страница 21: ...User information 21 International symbols ...