C DELAY START button (GEC
I
KT
I
RME TU
Ç
U)
This button allows starting of the machine to be delayed from 1 hour
up to a maximum of 19 hours.
The button must be pressed before pressing the START/PAUSE
(START ARA VERME) button.
The figures indicating the required delay appear for about 2 seconds in
the display next to the button. The duration of the selected wash pro-
gramme is then displayed. After one minute, the machine starts its
countdown (every hour).
During the last hour, the remaining time is displayed every 5 minutes.
The delayed start function
cannot
be used with the SPIN (SIKMA) (K)
DELICATE SPIN (HASSAS SIKMA) (L) and EMPTY (BO
Ç
ALTMA) (J) pro-
grammes.
To modify or cancel the preset delay, press the START/PAUSE (START
ARA VERME) button, then press the DELAY START (GEC
I
KT
I
RME TU
Ç
U)
button until the required value is displayed or, if you wish to cancel the
delay, until the symbol
h is displayed.
Then press the START/PAUSE (START ARA VERME) button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
D Display
The display shows the following information:
• if the programme selector knob is on the CANCEL (
I
PTAL) position,
three flashing dashes
appear immediately after pressing the ON/OFF
(AÇMA KAPAMA) button to indicate that the machine is ready to
receive instructions for the required wash programme;
•
duration of the selected wash programme
, calculated automatical-
ly on the basis of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is updated every
10 minutes, and every 5 minutes during the last 20 minutes.
• When the programme has finished,
three flashing zeros
are
displayed;
•
delayed start
, programmed using the special button (C).
The selected delay (19 hours max.) is indicated in the display. The
countdown is updated every hour, and every 5 minutes during the last
hour.
54
Description of the appliance
