AEG L8TFI735E2, Руководство пользователя

Страница: 18 / 40

8. OPTIONS
8.1 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
8.2 Päällä/Pois
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
8.3 Antiallergia
Set this option with white Puuvilla items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Ajansäästö
and Extra silent are not available.
The corresponding indicator above the
touch button illuminates.
This option removes micro-organisms
thanks to a washing phase with the
temperature maintained above 60°C for
several minutes. This helps in removing
germs, bacteria, micro-organism and
particles. The addition of vapour together
with an additional rinsing phase ensures
a proper removal of detergent residues
and pollens/allergenic items, making it
suitable for delicate and sensitive skins.
8.4 Ajansäästö
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator .
This option can also be used
to shorten the Höyry
programme duration.
8.5 Lämpötila
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance
does not heat the water).
8.6 Linkous
When you set a programme, the
appliance automatically selects the
maximum spin speed. The display shows
only the spin speeds available for the set
programme.
Touch this button repeatedly to:
• Decrease the spin speed.
• Activate the Rinse Hold option .
The water of the last rinse is not
drained out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum and the
final spin phase is not performed.
The display shows the indicator
.
The lid stays locked. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the lid.
Touch Käynnistä/Tauko button: the
appliance performs the spinning
phase and drains the water.
• Activate the Extra Silent option.
www.aeg.com 18