AEG L8TFI735E, Руководство пользователя

Страница: 16 / 36

The display shows the indicator
(cold), and the indicator
(no
spin) and the indicator .
• Activate the Linkous option
( Skipping the wash and rinse
phases ) .
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator the spin
speed.
If it is necessary to reduce
the spin speed, select a
programme with a lower
spin speed as default.
7.7
Tahrat/Esipesu
Press this button repeatedly to activate
one of the two options.
• Tahrat
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
. The stain remover
will be added in the appropriate
phase of the washing programme.
This option can increase
the programme duration
and is not available with a
temperature lower than
40 °C.
• Esipesu
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
The corresponding indicator above
the touch button illuminates.
7.8 Huuhtelu
With this button you can select one of
the following options:
• Lisähuuhtelu option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Vain huuhtelu
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
7.9 Höyryviimeistely
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero , the indicator
is
steady on and the indicator starts
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the lid unlocks.
A small laundry load helps to
reach better results.
7.10 Ajastin
With this option you can delay the start
of a programme in a more convenient
time.
www.aeg.com 16