This option can increase
the programme duration.
10.8 Extra Spoelen
With this option you can add up to 3
rinses accordingly to the selected
washing programmes.
Useful for people allergic to detergents
and in areas where the water is soft.
The
indicator shows the selected
number of rinses.
This option increases the programme
duration.
If the Extra Spoelen is set as
a default option and you
select a compatible washing
programme, the display
shows
. In this case, by
pressing the Extra Spoelen
button , it is possible to add
just one rinse.
10.9 Skipping phase button
(Extra)
By touching this button you can set:
• Only Rinse
option. The appliance
performs only the rinsing phase , the
spinning and the draining phases of
the selected programme.
• Only Spin option. The appliance
performs only the spinning phase of
the selected washing programme.
• Only Drain option. The appliance
performs the only draining phase of
the selected washing programme.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
10.10 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme. The steam
phase reduces fabric creasing and
facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
The drum performs smooth movements
for about 30 minutes. The duration of the
steam phase changes accordingly to the
selection. When Plus Steam option is set
the programme ends up with an
anticrease phase during which the drum
is occasionally rotated to prevent
wrinkling. The display shows the
indicator is steady on and the
indicator
starts flashing. Start/Pauze
button is lit as well. At the end of the
anticrease phase the drum definitely
stops, the indicator goes off, the door
unlocks. User at any moment can
terminate the anticrease phase by:
• pressing the Aan/Uit button for a few
seconds to activate or deactivate the
appliance;
• turning the selector knob to another
position.
A small laundry load helps to
reach better results.
10.11 Startuitstel
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pauze button,
the display shows the indicator and
the selected delay time and the
appliance begins the countdown.
10.12 Start/Pauze
Touch the Start/Pauze button to start,
pause the appliance or interrupt a
running programme.
www.aeg.com
20
Содержание L8TEN65C
Страница 1: ...USER MANUAL EN User Manual Washing Machine L8TEN65C ...
Страница 38: ......
Страница 39: ......
Страница 40: ...www aeg com shop 135995541 A 312021 ...