AEG L7FE96CS, Руководство пользователя, Страница: 15 / 40

This option increases the programme
duration.
If the Extra Spoelen is set as
a default option and you
select a compatible washing
programme, the display
shows
. In this case, by
pressing the Extra Spoelen
button , it is possible to add
just one rinse.
6.7 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
This option increases the
programme duration
slightly.
When the programme stops the display
shows a zero , the indicator
is
steady on and the indicator starts
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
6.8 Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
.
If you select the Cotton
programme at 40°C or 60°C,
the display shows the
indicator
; these are
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
6.9 Tijd Besparen
With this option you can decrease the
programme duration.
• If your laundry is just daily soiled, it
may be advisable to shorten the
washing programme. Touch this
button
once
to decrease the duration.
• If the items to be washed are slightly
soiled, touch this button twice to set
an extra quick programme.
The display shows the indicator .
This option can also be used
to shorten the Stoom
programme duration.
6.10
Skipping phase button
(Extra)
By touching this button you can set:
• Only rinse at first touch. The washing
programme starts from the rinsing
phase by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Only spin at second touch. The
appliance skips wash and rinse phase.
• Only drain at third touch. The
appliance performs only the drain
phase.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
6.11
Startuitstel
With this option you can delay the start
of a programme in a more convenient
time.
ENGLISH 15