manualshive.com logo in svg

AEG L7FBE941Q, Руководство пользователя, Страница: 48 / 56

Поделиться
Скачать
AEG L7FBE941Q Скачать руководство пользователя страница 48

Problem

Possible solution

The App cannot connect
to the appliance.

• Check the wireless signal.
• Check if your smart device is connected to the wireless net-

work.

• Check your home network and router.
• Restart the router.
• Contact your wireless service provider if there are problems

with the wireless network.

• The appliance, the smart device, or both, need to be con-

figured again because a new router has been installed or
the router configuration has been changed.

The App cannot fre-
quently connect to the
appliance.

• Make sure that the wireless signal reaches the appliance.

Try to move the home router as near the appliance as pos-
sible or consider purchasing a wireless range extender.

• Make sure the wireless signal is not disrupted by micro-

wave. Turn the microwave off. Avoid using the microwave
and the remote control at the same time.

The appliance makes an
unusual noise and vi-
brates.

• Make sure the levelling of the appliance is correct. Refer to

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are

removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme duration
increases or decreases
during programme exe-
cution.

• The ProSense function is able to adjust the programme du-

ration according to the type and the laundry load size. Re-
fer to "The ProSense load detection" in "Daily Use" chap-
ter.

The washing results are
not satisfactory.

• Increase the detergent quantity or use a different deter-

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.
• Decrease the laundry load.
• When using AutoDose tanks, make sure that they are not

empty.

• When using AutoDose tanks, verify the pre-set detergent/

fabric softener dose. Refer to "AutoDose basic setting"
paragraph in "The AutoDose Technology (Autodosing)"
chapter.

Too much foam in the
drum during the washing
cycle.

• Reduce the quantity of detergent.
• When using AutoDose tanks, verify the pre-set detergent/

fabric softener dosage. Refer to "AutoDose basic setting"
paragraph in "The AutoDose Technology (Autodosing)"
chapter.

The detergent/fabric
softener level does not
decrease in the Auto-
Dose tanks after washing.

• This is normal: tanks are quite large and detergent con-

sumption may be not so evident.

www.aeg.com

48

Содержание L7FBE941Q

























































Отзывы:

Нет отзывов