AEG L6FBQ94GS, Руководство пользователя

Страница: 35 / 60

When touching the Start/
Pauze - Départ/Pause
button after the indicator
stops blinking, the
Remote Start is not
activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote button and confirm by
pressing the Start/Pauze - Départ/Pause
button.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Aan/Uit - Marche/Arrêt
button for a few seconds to activate
the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
the default programme.
The display shows the programme
duration, the maximum load (for a few
seconds only), the default temperature,
the default spin speed and the indicators
of the phases making up the programme.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
ENGLISH 35