AEG L 82470 BI, Инструкция пользователя, Страница: 8 / 72

B
Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols.
C
Programme progress display: PREWASH , MAIN WASH , RINSE
, SPIN , DRAIN , OVERDOSAGE
• The programme progress display shows the different phases of the
selected programme.
• During washing, a black line blinks under the running phase sym-
bol. At the end of each phase, the line stops blinking and remains
on
If the symbol comes on, it indicates that too much deter-
gent has been used.
D
CHILD SAFETY LOCK - symbol.
E DELAY START - symbol.
F
The display shows the following information:
•
Duration of the selected programme
– After setting a programme, the duration is displayed in hours and
minutes (for example ).
– After the programme has started, the remaining time is updated
every minute.
• Delay start
– When setting a delay start, the display shows the delay time (20
hours max.) for about 3 seconds (for example ), and then it
shows again the programme duration.
– The delay time value decreases by one unit every hour and then,
one hour before the end of the programme, the time decreases
every minute.
• Incorrect option setting
– In case of wrong setting the display shows the message Err and
the yellow light of the button 8 starts blinking.
• Alarm codes
– If an operating problems occur, the display can show some alarm
codes, for example (see chapter «Troubleshooting»).
• End of the programme
– At the end of the programme the display shows blinking zero ,
the symbol disappears and the door can be opened.
G TIME SAVING - option symbol.
H
DOOR - symbol
• This symbol indicates if the door can be opened:
– The symbol is on: the door cannot be opened. The appliance is
performing a washing programme.
– The symbol is off: the door can be opened. The washing pro-
gramme is finished.
I
Available options: PREWASH , STAIN , SENSITIVE , EXTRA
RINSE
8
www.aeg.com