AEG L 75470 FL Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 36

AEG L 75470 FL Скачать руководство пользователя страница 5

• Do not install and connect a damaged

appliance.

• Make sure to remove all packaging and

transport bolts.

• Make sure that the mains plug is dis-

connected from the mains socket dur-
ing installation.

• Only a qualified person must do the

electrical installation, the plumbing and
the installation of the appliance. This to
prevent the risks of structural damage
or injury.

• Do not install or use the appliance

where the temperature is less than 0 °C.

• When you install the appliance on a

carpet floor, make sure that there is air
circulation between the appliance and
the carpet. Adjust the feet to have the
necessary space between the appliance
and the carpet.

Water connection

• Do not connect the appliance with old

hoses already used. Only use new ho-
ses.

• Make sure not to cause damage to the

water hoses.

• Do not connect the appliance to new

pipes or pipes not used for a long time.
Let the water flow for some minutes,
then connect the inlet hose.

• The first time you use the appliance,

make sure that the water hoses and the
couplings do not have leakages.

Electrical connection

• Make sure that the appliance is earth-

ed.

• Make sure that the electrical informa-

tion on the rating plate agrees with the
power supply.

• Always use a correctly installed shock-

proof socket.

• Do not use multiple plugs and exten-

sion cables. There is a risk of fire.

• Do not replace or change the mains ca-

ble. Contact the service centre.

• Make sure not to cause damage to the

mains plug and cable.

• Connect the mains plug to the mains

socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug.

DISCARD THE APPLIANCE

1.

Disconnect the mains plug from the
mains socket.

2.

Cut off the mains cable and discard it.

3.

Discard the door catch. This prevents
children or pets to be closed in the
appliance. There is a risk of suffoca-
tion (only for front-loading applian-
ces).

TECHNICAL INFORMATION

Dimensions

Width / Height / Depth

605 / 850 / 605 mm

Total depth

640 mm

Electrical connection:

Voltage
Overall power
Fuse
Frequency

230 V

2200 W

10 A

50 Hz

Water supply pressure

Minimum

0,5 bar (0,05 MPa)

Maximum

8 bar (0,8 MPa)

Water supply

1)

Cold water

Maximum load

Cotton

7 kg

Spin speed

Maximum

1400 rpm (L75470FL)
1600 rpm (L75670FL)

ENGLISH

5

«
...
3
4
5
6
7
...
»

Содержание L 75470 FL





































Отзывы:

Нет отзывов