Problem
Possible cause
Remedy
and a number come on.
There is an error in the hob.
Deactivate the hob and activate it
again after 30 seconds. If
comes
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
You can hear a constant beep
noise.
The electrical connection is incor‐
rect.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model IKE84445XB
PNC 949 597 272 00
Typ 62 D4A 03 AA
220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW
Made in: Germany
Ser.Nr. .................
7.35 kW
AEG
9.2 Cooking zones specification
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost
maximum dura‐
tion [min]
Cookware diame‐
ter [mm]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Middle front
1400
2500
4
125 - 145
Right rear
1600 / 2300 / 3000
2500 / 3600 / 3600
10 / 10 / 10
125 - 180 / 210 -
240 / 285 - 320
The power of the cooking zones can be
different in some small range from the data in
the table. It changes with the material and
dimensions of the cookware.
For optimal cooking results use cookware no
larger than the diameter in the table.
56
ENGLISH
Содержание IKE84445XB
Страница 158: ...158 ...
Страница 159: ...159 ...
Страница 160: ...www aeg com shop 867372039 A 282021 ...