AEG GS45AVB, Руководство пользователя, Страница: 67 / 72

we recommend to run long duration
programmes at least 2 times per
month.
10.5 Cleaning the filters
C A B
1. Turn the filter ( A ) counterclockwise
and remove it.
2. Disassemble the filter ( A ).
3. Remove the filter ( B ).
4.
Wash the filters with water.
5. Before you put the filter ( B ) back,
make sue that there are no residues
of food or soil in or around the edge
of the sump. (
C
).
Make sure that the filter ( B ) is correctly
positioned under the 2 guides ( C ).
6. Assemble the filter ( A ) and put it into
position in filter (
B
). Turn it clockwise
until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11. TROUBLESHOOTING
If the appliance does not start or it stops
during operation, before you contact an
Authorised Service Centre, check if you
can solve the problem by yourself with
the help of the information in the table.
With some problems the end indicator
flashes intermittently indicating a
malfunction.
Problem and alarm code Possible solution
You cannot activate the appliance. • Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no a damage fuse in
the fuse box.
The programme does not start. • Make sure that the appliance door is closed.
• The appliance has started the procedure to re-
charge the resin inside the water softener. The
duration of the procedure is approximately 5
minutes.
ENGLISH 67