AEG FSS62600P Скачать руководство пользователя страница 15

approximately 3 seconds and then

shows the programme duration.

4.

Set the applicable options.

5.

Close the appliance door to start the

programme.

Starting a programme with

delay start

1.

Set a programme.

2.

Press 

 repeatedly until the display

shows the desired delay time (from 1

to 24 hours).

The indicator 

 is on.

3.

Close the appliance door to start the

countdown.

During the countdown, it is possible to

increase the delay time but not to

change the programme and options.
When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry

function.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.

Press and hold 

RESET

 until the appliance

is in programme selection mode.

Cancelling the programme

Press and hold 

RESET

 until the appliance

is in programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the
display shows 0:00 and the 

 indicator

is on.
All buttons are inactive except for the

on/off button.

1.

Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2.

Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

10. 

HINTS AND TIPS

10.1 

General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to help you protect the environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, select a programme

with a prewash phase.

ENGLISH

15

Содержание FSS62600P

























Отзывы: