background image

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

CAUTION!

If children have access to

the appliance, we advise to

deactivate AirDry. The

automatic opening of the

door may pose a danger.

When AirDry opens the

door, Beam-on-Floor might

not be completely visible. To

see if the programme is

complete, look at the control

panel.

6.6 Key tones

The buttons on the control panel make a

click sound when you press them. You

can deactivate this sound.

6.7 Latest programme

selection

You can set the automatic selection of

the most recently used programme and

options.
The latest programme that was

completed before the appliance

deactivation is saved. It is then selected

automatically after you activate the

appliance.
When the latest programme selection is

disabled, the default programme is ECO.

7. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start the programme Quick to

remove any residuals from the

manufacturing process. Do not use

detergent and do not put dishes in

the baskets.

After starting the programme, the

appliance recharges the resin in the

water softener for up to 5 minutes. The

washing phase starts only after this

procedure is complete. The procedure is

repeated periodically.

7.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with dishwasher

salt (until it is full).

4. Carefully shake the funnel by its

handle to get the last granules inside.

5. Remove the salt around the opening

of the salt container.

www.aeg.com

14

Содержание FSE74717P

































Отзывы: