manualshive.com logo in svg

AEG FSE73507P, Руководство пользователя, Страница: 22 / 28

Поделиться
Скачать
AEG FSE73507P Скачать руководство пользователя страница 22

3. Wash the spray arm under running

water. Use a thin pointed tool, e.g. a

toothpick, to remove particles of soil

from the holes.

4. To install the spray arm back, insert

the mounting element in the spray

arm and fix it in the duct by turning it

counterclockwise. Make sure that the

mounting element locks into place.

11. TROUBLESHOOTING

WARNING!

Improper repair of the

appliance may pose a

danger to the safety of the

user. Any repairs must be

performed by qualified

personnel.

The majority of problems that may

occur can be solved without the need

to contact an Authorised Service

Centre.
Refer to the below table for information

on possible problems.
With some problems, the display shows

an alarm code.

Problem and alarm code

Possible cause and solution

You cannot activate the ap‐

pliance.

• Make sure that the mains plug is connected to the mains

socket.

• Make sure that there is no damaged fuse in the fuse

box.

www.aeg.com

22

Содержание FSE73507P





























Отзывы:

Нет отзывов