AEG FFE72731PM Скачать руководство пользователя страница 23

14.4 

Water drain hose

The highest point of the drain hose must

be no more than 600 mm from the floor

and must have a continuous fall to the

plumbing connection.
The drain hose can be lengthened using

additional lengths and connectors. These

must be purchased from Electrolux Spare

Parts. The extension length must not

exceed 2 metres.
The drain hose must be free of

obstructions.
Remove the sink plug when the

appliance drains the water to prevent

that the water goes back into the

appliance.
The appliance has a security feature to

prevent dirty water going back into the

appliance. If the spigot of the sink has a

non-return valve, this valve can cause the

appliance to drain incorrectly. remove

the non-return valve.
If you connect the water drain hose to a

trap spigot under the sink, remove the

plastic membrane. If you do not remove

the membrane, remaining food can

cause a blockage in the drain hose

spigot.

Remove

entire

internal

membrane

15. 

WARRANTY

FOR SALES IN AUSTRALIA AND NEW

ZEALAND
ALL AEG BRANDED APPLIANCES

This document sets out the terms and

conditions of the product warranties

for AEG Appliances. It is an important

document. Please keep it with your

proof of purchase documents in a safe

place for future reference should there

be a manufacturing defect in your

Appliance. This warranty is in addition

to other rights you may have under

the Australian Consumer Law.
1. In this warranty:

a)

‘ACL’ or ‘Australian Consumer

Law’ means Schedule 2 to the

Competition and Consumer Act

2010;

b)

‘Appliance’ means any Electrolux

product purchased by you and

accompanied by this document;

c)

‘ASC’ means Electrolux’s

authorised serviced centres;

d)

‘AEG’ is the brand controlled by

Electrolux Home Products Pty

Ltd of 163 O’Riordan Street,

Mascot NSW 2020, ABN 51 004

762 341 in respect of Appliances

purchased in Australia and

Electrolux (NZ) Limited

(collectively “Electrolux”) of 3-5

Niall Burgess Road, Mount

Wellington, in respect of

Appliances purchased in New

Zealand;

e)

‘Warranty Period’ means the

period specified in clause 3 of

this warranty;

f)

‘you’ means the purchaser of the

Appliance not having purchased

the Appliance for re-sale, and

‘your’ has a corresponding

meaning.

2. Application:

 This warranty only

applies to new Appliances,

purchased and used in Australia or

New Zealand and is in addition to

(and does not exclude, restrict, or

modify in any way) other rights and

remedies under a law to which the

Appliances or services relate,

including any non-excludable

statutory guarantees in Australia and

New Zealand.

3. Warranty Period:

 Subject to these

terms and conditions, this warranty

continues for in Australia for a period

of 60 months and in New Zealand for

a period of 60 months, following the

date of original purchase of the

Appliance.

ENGLISH

23

Содержание FFE72731PM





























Отзывы: